CheckPoint Off-Road Products

Shipping & Handling:
We've added $7.25 to each part ordered. If you want the most cost effective shipping and handling for multiple product orders, click here.



PART NO. 2300
KYB High Speed Compression Quick Adjuster

  1. Easily adjust high speed compression damping (ride height).
  2. A must for off-road racers where shock fade because of heat is an issue.
  3. A quarter turn tighter an hour and a half into a race will bring your shocks performance back up and make all the difference heading into the final laps.

FITMENT: Showa and WP available July 1st

PRICE: $48.00










PART NO. 5245
Radiator Hose Cooler

  1. Lowers engine temperature by as much as 15 degrees.
  2. Gain performance and extend clutch and engine life by a cooler running motor with this trick in-line cooler.
  3. Don't sacrifice engine life by higher than optimum operating temperatures.
  4. Measures 75mm (3in) Total 115mm (4.5in) Stainless clamps included.

FITMENT: Most Models

PRICE: $49.00










PART NO. 2301
WP Reservoir Bladder Kit

  1. Eliminates friction and greatly reduces heat over the conventional piston design
  2. Offers a more reactive, smoother ride and absorbs small bumps better.
  3. Hardcoated for low wear qualities
  4. Red anodized for the works look

FITMENT: 08-11 KTMs

PRICE: $148.00










PART NO. 2303
Preload Ring

  1. Eliminates torsion binding associated with spring compression
  2. Provides more consistent shock action and reduces spiking
  3. Sealed Teflon ring eliminates unreliable needle bearing
  4. Hard anodized and Teflon coated for smooth action and low wear qualities
  5. Affordable alternative to the high priced, high maintenance "works" preload rings

FITMENT: All KYB and Showa 46mm and 50mm shock bodies. WP coming soon.

PRICE: $88.00

AVAILABLE MAY 1st.











PART NO. 2307
Sachs Shock Bladder Kit

  1. Eliminates friction and greatly reduces heat over the conventional piston design
  2. Offers a more reactive, smoother ride and absorbs small bumps better.

FITMENT: Husqvarnas and GasGas with Sachs shocks

PRICE: $57.00









PART NO. 2101
Aluminum Handguard Clamps

  1. The original 4-bolt design since 1997, for maximum holding power
  2. The first U-shaped clamp for no interference cable routing
  3. Precision machined for superior fit
*Highest quality stainless bolts

FITMENT: All tapered bars (twin wall coming soon)

PRICE: $49.00









PART NO. 2103
Aluminum Bar Ends

  1. Saves throttle tube and grips from damage
  2. Red anodized aluminum bolt for a clean custom look
  3. The perfect accessory for the rider that likes to switch from full wrap to open handguards

FITMENT: All aluminum bars

PRICE: $19.00









PART NO. 2105
Handlebar Vibration Reducing Inserts

  1. Revolutionary design reduces vibration by as much as 60%
  2. Machined from high quality 416 non-corrosive stainless
  3. Screws securely in to the end of handlebar and provides a solid mount for handguards
  4. Aluminum end included for use if not using handguards and provides a protective seal for the throttle tube
  5. Specifically effective for the new 'street legal dirt bike' craze
  6. Tap included

FITMENT: All aluminum bars

PRICE: $67.00









PART NO. 2305
WP PDS Bladder Kit

  1. Eliminates friction and greatly reduces heat over the conventional piston design
  2. Offers a more reactive, smoother ride and absorbs small bumps better.

FITMENT: 98-07 KTMs

PRICE: $59.00










PART NO. 5001
GASGAS 124mm Linkage Pull Rods

  1. Offers much improved straight line stability over the 122mm stock units
  2. Complete with bushings, ready to bolt on

FITMENT: All GasGas 2-strokes

PRICE: $74.00










PART NO. 5003
GASGAS Ultra cooling Impeller

  1. Precision machined for reduced hydrodynamic drag
  2. Coolant flows at a higher velocity to prevent power loss from overheating engine and clutch wear from overheating
  3. Replaces the OEM plastic impeller that distort under extreme temperature and diminish cooling capacity

FITMENT: All GasGas 2-strokes

PRICE: $49.00










PART NO. 5243
KTM 2-Stroke Ultra Cooling Impeller

  1. Precision machined for reduced hydrodynamic drag
  2. Coolant flows at a higher velocity to prevent power loss from overheating engine and clutch wear from overheating
  3. Replaces the OEM plastic impeller that distort under extreme temperature and diminish cooling capacity

FITMENT: All KTM 2-strokes 2007 and newer 105cc and up

PRICE: $55.00










PART NO. 5005
GASGAS Teflon Coated Wheel Spacers

  1. Replaces the fast wearing OEM spacers
  2. Kit includes two fronts and one rear wheel spacer
  3. Fronts are stainless with anodizing
  4. Rear is hard coated, Teflon coated precision machined aluminum

FITMENT: 2003 and newer Gas Gas

PRICE: $31.00










PART NO. 5007
GASGAS Rear Brake Pedal bushing

  1. Replaces low quality stock piece
  2. Machined from 303 stainless for no wear

FITMENT: All GasGas

PRICE: $23.00










PART NO. 5009
GasGas 12oz. Fly Wheel Weight

  1. Improve tractor-ability of your 2-stroke GasGas
  2. Improved power delivery.
  3. Reduced stalling.
  4. Precision machined for perfect balance.
  5. Black zinc dichromate coated

FITMENT: All GasGas 2-Strokes

PRICE: $67.00










PART NO. 5011
GasGas Power Valve Cover

  1. Larger volume chamber makes more low to mid range power and better throttle response.
  2. Machined from solid billet aluminum to exacting tolerances.
  3. Drain screw allows for elimination of excess oil.

FITMENT: All GasGas 2-strokes.

PRICE: $84.00